• Slot Effects Optc
• Matching Slot Effects Optc

Captain Effect: Reduces cooldown of all specials by 3 turns at the start of the fight, reduces ATK, HP and RCV of all characters by 90% Special Attribute: Reduces damage received from PSY enemies by 100% for 1 turn HP: 223 Attack: 109 RCV: 475 EXP: 392,109 Cost: 11 Note: Holy cow. She's weak but she's the first PSY nullifier so let's deal with. Fan run database for One Piece Treasure Cruise. Includes a character database with all unit captain abilities, descriptions, sailor abilities, and special abilities.

Optical fiber connectors are used to join optical fibers where a connect/disconnect capability is required. Due to the polishing and tuning procedures that may be incorporated into optical connector manufacturing, connectors are often assembled onto optical fiber in a supplier's manufacturing facility.

The VDO Face 5 HC is a high-contrast outdoor-rated LED video panel with a pixel pitch of 5.2 mm for the rental market. This well-designed panel from Martin is driven by the same P3 System Controller as all other Martin LED Video products for a seamless total video solution. Consistent pixel-to-pixel calibration not only gives the best image quality, it also enables panels from different batches to be mixed. Ease of service and support from a brand that is here to stay give you peace of mind.

• Bright flicker-free video output
• Consistent calibration allowing cross-renting between different batches
• Easy setup, mapping and configuration, and easy mix with other Martin LED Video products

• 5.2 mm pixel pitch
• 3000 nits calibrated
• Compatible with Martin P3 System Controllers for mix and match with other (Creative) LED Video products
• Pixel-level brightness and color calibration for optimal image quality
• High-quality 16 bit per color P3 image processing technology
• Integration with lighting and motion controls via P3 System Controller
• Intuitive mapping and addressing via P3 System Controller
• IP65 rated (all sides and angles) for reliable outdoor (and indoor) use
• LED ageing compensation via P3 Fixture Adjuster
• Easy swap of LED blocks from behind (and in front of) the screen
• Easy swap of power supply and mainboard in the middle of a screen
• High refresh rate for flicker-free performance

• VDO Face 5 HC LED Video Panel
• Width: 500 mm (19.7 in.)
• Height: 562.5 mm (22.2 in.)
• Depth: 105 mm (4.2 in.)
• Weight: 10.5 kg (23.2 lbs.)
• VDO Face Single Header
• Width: 500 mm (19.7 in.)
• Height: 36 mm (1.5 in.)
• Depth: 69 mm (2.8 in.)
• Weight: 2.4 kg (5.3 lbs.)
• VDO Face Double Header
• Width: 1000 mm (39.4 in.)
• Height: 36 mm (1.5 in.)
• Depth: 69 mm (2.8 in.)
• Weight: 5.0 kg (11.1 lbs.)

• Addressing and status: Via Martin™ P3 System ControllerMapping: Via Martin™ P3 System
• ControllerFirmware update: Via Martin™ P3 System Controller

The rental price of the Martin VDO Face 5 Blackface HC Outdoor 8:9 LED Panel €180,- per day and per square meter

For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

The CLF TURBINE is a powerful touring fan with high-strength plastic blades and a solid metal housing for a durable and long-lasting lifespan. The fan can be controlled manually by using the on-board menu, by wireless remote or by DMX.
The speed of the fan is adjustable from 1%-100%. The Turbine can be mounted in any position and the airflow direction is manually adjustable.

The rental price of the CLF TURBINE is €20,- per piece per day.

For availability and up to date rental prices please download our price list HERE
or contact our specialists at +31 026 325 5392.

The EF Smoke 3100 is a fast vertical fog machine with very bright colors due to 32 RGB LEDs. The unique “immediate-stop” patented technology lets the jet start and stop synchronous and consistently. The EF Smoke 3100 is for indoor use and can be placed flatwise or up-side-down.

The rental price of the CLF SMOKE 3100 RGB fogger is €15,- per piece per day.

For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

AORUN, an ultra-bright beam fixture which combines high output, fast movements and an extensive feature package. The fixture utilises a 330W HRI light source which produces heavy mid-air effects through the special designed 169mm lens.

The fixture has an 8 & 16 facet prism on-board. These prisms can be combined for even wider effects. Additionally, the gobo wheel offers 3 animation ranges, creating unique beam effects. A softening frost completes the effect package of the Aorun.

The rental price of the CLF AORUN is €50,- per piece per day.

For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

MX16x16DVI-Pro is the highest performance modular expandable DVI routing switcher that offers up to 16 inputs and up to 16 outputs. Multiple type input and output cards (DVI; Fiber and CAT5) can be used in mixed format that allows the most flexible and integrated solution on the market.
Each Input and Output card contains 8 channels, and any combination can be used in a single frame. For short distances up to 50 meters the DVI or CAT5 I/O cards are suggested, for longer distances fiber solution is suggested.

Single Fiber Technology: Lightware single fiber technology offers the latest, state of the art digital signal transmission. Only one multimode fiber cable is used per one DVI signal, opposite to competitors, who use 4 fiber channels and copper wires. Single fiber technology lowers the system infrastructure cost and isolates sources and receivers from ground loops and hum noises. MX16x16DVI-Pro fiber crosspoint matrix switcher supports all DVI-D resolutions up to 1920x1200 and 2048x1080.
All outputs of the DVI matrix router are reclocked for stable, jitter free signal transmission. Each DVI output powers fiber optic DVI cables on +5V pin, that allows transmission of DVI signals for long distances.
The unit can be controlled either by RS232 / RS422 port or TCP/IP LAN connection or by built in website.

• Hybrid fiber, DVI and CAT5 input and output capabilities
• Single Fiber Technology
• Rugged Neutrik fiber connectors for rental applications
• DVI signal transmission over one CAT5 cable
• Routing from 8x8 up to 16x16 single link DVI signals
• 50 meter DVI cable compensation on all DVI and RJ45 inputs
• Field-upgradeable, modular design
• Web page hosting capabilities
• 1920x1200 and 2048x1080 maximal resolutions
• Front panel buttons control
• Advanced EDID Management
• RS 232 or RS422 and Ethernet control

The rental price of the MX16x16 DVI-Plus, 16x16 DVI Matrix KIT is €350,- per piece, per day.
For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

The MX2-8x8-HDMI20-Audio is the first Lightware HDMI2.0 standalone matrix switcher that supports uncompromised 4K UHD resolution at 60Hz 4:4:4. Thanks to its compact size and silent design, it is particularly suitable for offices and meeting rooms, for 4K live events, and for futureproof operation centers. It is also a perfect choice for home theater enthusiasts who demand the highest quality along with HDMI2.0 and 4K@60Hz video signals. This standalone product has 8 HDMI2.0 inputs and 8 HDMI2.0 outputs transmitting up to 4K at 60Hz in 4:4:4 format, while supporting 3D, Dolby TrueHD and DTS-HD Master Audio. Each input port has audio connectors for embedding analog audio into the HDMI stream. Likewise, the audio connectors next to the output ports can provide de-embedded audio* for amplifiers and audio systems

• 4k@60Hz with RGB 4:4:4 colorspace, 18 Gbps bandwidth
• HDMI 2.0, HDMI 1.x and DVI 1.0 compliant
• HDCP 2.2 and HDCP 1.4 compliant with cross conversion capabilities
• Fully non-blocking switching architecture with zero frame delay
• Splitting of 4K UHD at 60Hz to two output ports with left half and right half of the original video
• 4:4:4 to 4:2:0 downconversion
• Built-in web interface
• RS-232, Ethernet and USB control options
• Pixel Accurate Reclocking on each input
• HDR and Dolby Vision support*
• Advanced EDID Management
• Compact and silent design
• LCD and push buttons for front panel control
• Front to back cooling airflow

The rental price for the MX2-8X8-HDMI20-AUDIO & 8x8 HDMI 2.0 full 4K matrix Switcher is €225,- per piece, per day.
For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

The HDMI20-OPTC-TX/RX220-Pro is a HDMI 2.0 compatible, HDCP 2.2 compliant extender pair for video, RS-232 and Gigabit Ethernet signals, supporting uncompressed 4K UHD resolution at 60Hz 4:4:4. This extender pair is particularly recommended for rental and staging applications, 4K live events, and for future-proof operation centers. The extender can transmit HDMI 2.0 signals with 18Gbps over one multimode fiber to a distance of up to 700 meters*. Video and Ethernet signals are transferred over a single optical line.

Using the factory, custom or transparent EDID emulation the user can fix and lock EDID data on the HDMI connector. Advanced EDID Management forces the required resolution from any video source and fixes the output format conforming to the system requirements. The unit offers bi-directional and transparent RS-232 transmission and two separate Gigabit Ethernet signals over the fiber connection.

All devices can be mounted on a rack shelf or used standalone, rack ears also serve easy handling and bump protection, mounting threads on top and one of the sides to conform strict installation safety regulations.

The device features Pixel Accurate Reclocking, a Lightware technology to eliminate jitter and skew generated by low quality sources and multiple daisychained devices. Single fiber technology makes these units fully HDMI compliant without need of a second fiber cable or copper connections. Galvanic isolation between source and display helps avoiding ground loops and hum effects. No delay occurs in the signal during optical conversion, the video image is transported without frame latency. This feature is crucial in 3D applications and systems where audio is processed separately.

Lightware’s HDMI20-OPTC series supports both HDR10 and Dolby Vision in the HDMI signal at 10 or 12 bit speeds respectively, within its frame bandwidth of 18 Gbps maximum.

• Resolutions up to 4k@60Hz with RGB 4:4:4 colorspace
• Video and Ethernet signal extension over a single optical line
• 18 Gbps bandwidth
• HDMI 2.0, HDMI 1.x and DVI 1.0 compliant
• HDCP 2.2 compliant
• Splitting of 4K UHD at 60Hz to two output ports with left half and right half of the original video*
• 36-bit deep color support
• 3D signal compatibility with frame packing, side-by-side and top-bottom formats
• HDR and Dolby Vision support*
• 2x HDMI inputs for main/backup sources with autoswitch*
• Supports all HDMI audio formats: Dolby TrueHD and DTS-HD Master Audio
• 2x Gigabit Ethernet (control for both outputs)
• Ethernet and USB control options
• Pixel Accurate Reclocking on each input
• Advanced EDID Management
• Color graphic LCD and jog dial push button for front panel control on TX side
• Lightware Device Controller software control over Ethernet and USB
• Third party control with LW3 protocol over Ethernet or RS-232
• Firmware upgrade with Lightware Device Updater software over Ethernet
• Neutrik OpticalCON fiber connectors
• Breakout LC connector for Neutrik OpticalCON Duo
• Local monitor output on TX side
• Built-in universal power supply
• Mounting thread on top and one of the sides and fixed mounting ears for safe and secure installation
• Handles for rigging and safety wire rope

• Built-in Event Manager automation feature
• Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
• Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
• HDMI 2.0, HDMI 1.4 and DVI 1.0 compliant
• HDCP 2.2 compliant (transparent pass-through)
• Bi-directional RS-232 extension (pass-through and control)
• No signal latency, zero frame delay
• Single Fiber Technology
• Dual output with built-in distribution amplifier
• Advanced EDID Management
• Command injection on RS-232 and IR ports
• Front panel LCD menu and buttons for crosspoint control
• Multiple TCP/IP connections
• Intuitive control software for device configuration
• Device control via Ethernet (TCP/IP), RS-232 and USB
• No video compression
• Built-in universal power supply
• Directly mountable in 19' rack
• Breakout LC connector for Neutrik OpticalCON Duo unused fiber channel
• EtherCON ruggedized LAN connector
• Active fan cooling
• Front to back cooling airflow

The rental price for both HDMI20-OPTC-TX220-Pro & RX220-Pro are €85,- per piece, per day.
For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

A flyable active subwoofer, equipped with a 18” neodymium woofer and crafted to complete with impressive low-end frequencies and vigorous SPL VIO L210’s accurate, phase coherent wave front.

• Active single 18” horn loaded subwoofer
• Last generation Digipro G4 Amp Technology
• 1600 W RMS class D DIGIPRO G4 amplifier with PFC
• System Auto-Test for quick diagnostics
• Integrated flying hardware (compatible with VIO L210)
• Designed for maximum efficiency in the lower end
• On board delay for perfect time alignement
• On board cardioid array configuration preset
• Modular slot for network and digital audio expansion cards

Description dBTechnologies VIO S118 Subwoofer:

• Speaker Type: Active Horn-Loaded Flyable Subwoofer

• Frequency Response [- 6 dB]: 36 Hz to Cut Freq (X-Over Dependent)
• Frequency Response [- 10 dB]: 33 Hz (HPF)
• Max SPL: 139 dB
• LF: 1x18', Neodymium
• Voice Coil LF: 4 '
• Directivity: Omnidirectional

• Controller: DSP 64 bit
• AD/DA Converter: 24 bit/96 KHz
• Limiter: RMS, Peak, Thermal
• Delay Option: 0-9.9 ms internal steps of 0.1 ms
• Crossover Frequency LF-HF: 60-110Hz + Full range
• LF-Xover out slope: 24 dB/Octave

• Signal Input: 1xXLR balanced
• Signal Output: 1x XLR balanced (link or X-over), 1xRJ45 LINK (RDNet)
• Expansion Card: 1xRJ45 IN (RDNet), 1xRJ45 LINK (RDNet)
• Power Socket: 1xPowerCON TRUE1 IN, 1xPowerCON TRUE1 OUT
• Controls:
• 1x Input Attenuation Rotary Switch
• 1x Rotary Encoder (Delay 9.9 ms)
• 1XPolarity Inversion Switch (0° or 180°)
• 1xCardioid Mode Switch
• 1x X-Over Freq Switch (60-110 Hz + Full Range
• 1x System Auto-test

• Housing: Multiplex plywood, Polyurea painted
• Handles: 2x Per Side, Aluminium
• Pole Mount: M20 Thread
• Raincover: Included
• Rigging Points: 2xPick Points on top to fix DRK-210 rigging frame (stack use), 4x Pick Points on top and 4x on bottom for rigging
• Width: 720 mm (28.34 in)
• Height: 520 mm (20.47 in)
• Depth: 695 mm (27.36 in)
• Weight: 45.1 kg (99.42 lbs)

The rental price* of the VIO S118 Active Subwoofer is €65,- per piece/p.day.

For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

DUAL MODE: HAZE AND FOG
Seamless switching between haze and fog modes. 100% duty cycle.

AUTOMATIC PURGING SYSTEM™ (APS™)
This system purges the heating module after the first heating cycle and after every emission of haze/fog preventing residual build up and clogging.

NETWORKING CAPABILITIES
theONE™ is the first atmospheric generator with networking capabilities. It can be controlled through its DMX/RDM connector or RJ45 node (Pathport embedded, ACN, ART-Net, ETCNet 2 & 3 and SHOWNet protocols). USB 2.0 Link connector for updates.

AUTOMATIC REFILL SYSTEM™ (ARS™)
Specially designed to give maximum, consecutive, non-stop hours of haze/fog without interruption, theONE™ automatically refills its internal fluid reservoir from an external 20 L (5.3 US gallon) container as required.

INTEGRAL TOURING FAN
External dual-position, adjustable fan with dedicated control channel which travels in its own compartment within the touring cradle. Can be mounted above or below haze/fog output to adjust directional flow.

TOTAL RUNNING TIME
theONE™, running at full intensity, will generate 308 hours of haze and 20 hours of fog from its 20 L fluid container. Gas bottle will need to be changed at 50 hours for haze and 15 hours for fog. This can be done during operation without interruption of fog or haze emission.

OPERATING VOLTAGE
theONE™ is unique in being the only atmospheric generator to offer automatic detection of universal voltage rating from 100-250 VAC, 50/60 Hz, single phase.

CERTIFICATION
theONE™ is a truly global product being CE certified, CSA and UL approved.

TOURING CRADLE
theONE™ cradle contains the generator, its fan and a convenient tool drawer, and accommodates our 20 L fluid container and, uniquely, all known sizes of 9kg (20 lb) CO2 or N2 gas bottle, within a single robust aluminium frame. Exceeding PLASA rigging standards the cradle is designed for rigging, stacking and rolling and sized to fit standard trucks/containers. The touring cradle ensures theONE™ is fit and ready for worldwide touring.

• Fluid consumption: 1 litre (29.6 oz) at 2.75 bar (40 psi) (per hour / max output)
• Fog volume: 100 m3 (3,531 ft3) (per minute / max output)
• Fog volume control Yes - variable
• Gas Consumption (CO2 or N2): 1.16 kg (2.56 lb) / (per hour / max output)
• Automatic Purging System Yes - Standard
• Fog / Haze Colour Pure White Fog
• Particle size 0,5 -0,7 Micron (m)
• Total running time 20 hours (15 hours – gas) (20-litre container, full intensity)
• Fluid type MDG Neutral Fluid (SDS available on request)

• Fluid consumption 65 ml (1.93 oz) at 2.07 bar (30 psi) (per hour / max output)
• Fog volume control Yes - variable
• Gas Consumption (CO2 or N2) 0.35kg (0.77 lb) / hour (per minute / max output)
• Automatic Purging System Yes - Standard
• Fog / Haze Colour Pure White Haze
• Particle size 0,5 - 0,7 Micron (m)
• Total running time 308 hours (50 hours – gas) (20-litre container, full intensity)
• Fluid type MDG Neutral Fluid (SDS available on request)

• Operating voltage 100 - 250 VAC, 50/60 Hz
• Power consumption 1100 - 1480 Watts
• Approval CE certified, CSA, UL approved
• Warm-up time < 8 minutes

• Weight 23 kg (50 lb)
• Shipping weight 25 kg (55 lb)
• DMX Yes, input-output
• RJ45 Yes –ACN
• DISPLAY LCD, backlit, 5-button command
• Height 61 cm (24”)
• Width 25 cm (10”)
• Depth 30 cm (12”)

• Weight 33.5 kg (74 lb)
• Shipping weight 36 kg (80 lb)
• Total operating weight 120 kg (265 lb) (North-American gas bottles and a full 20 L fluid container)
• DMX FAN Yes – Touring Version only
• Truss mounting Yes - 3 x 750 kg rated coupling holes
• Height 106 cm (42”)
• Width 76 cm (30”)
• Depth 61 cm (24”)

The rental price of the MDG theONE is €275,- per piece, per day.
For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

The best things come in small packages, now with zoom included. ROBIN® LED Beam 150 is the answer with fast sweeping beams and a wide far-reaching quality wash in compact housing.

Attractive colorful chases and smooth transitions are powered by a cluster of high power multichip 30W RGBW LEDs. The spectacular zoom range of 3,8° to 60° uses an eminent custom-designed optical system. A highly optimized motorised control produces speedy pan and tilt movement. Besides intense strobing capabilities, the LEDBeam 150 also offers gentle 18-bit dimming, including Tungsten lamp effects. Simplified control via pre-programmed colors on a virtual color wheel and various strobing and pulsing effects allows quick and easy programming.

• Lamp: Osram Sirius HRI 470 W RO
• Licht output: MEGA bright 2.215.000 lx @ 5 m
• Zoom range: 1.8°– 21° beam modu, 3°– 42° spot modu
• Effects: rotating and static gobo wheel, animation wheel, 12 beam and flower effects

• Light source type: 7 x 30 W RGBW multichips
• LED life expectancy: min. 20.000 hours
• Typical lumen maintenance: 70% @ 20.000 hours
• OPTICAL SYSTEM
• Robe’s proprietary optical design
• High - efficiency zoom optical system, ratio: 15,5:1

• Robe’s proprietary optical design
• High - efficiency zoom optical system, ratio: 15,5:1
• Zoom range: 3,8° - 60°
• Fixture total lumen output: 2.842 lm
• Light output: 12.200 lx @ 5 m

Slot Effects Optc

• Colour mixing mode RGBW or CMY
• Variable CTO: 2.700K - 8.000K
• Virtual Colour Wheel: with 66 preset LEE swatches
• Tungsten lamp effect at whites: 2.700K and 3.200K (red shift and thermal delay)
• Colour mixing mode RGBW or CMY
• Variable CTO: 2.700K - 8.000K
• Virtual Colour Wheel: with 66 preset LEE swatches
• Tungsten lamp effect at whites: 2.700K and 3.200K (red shift and thermal delay)

• Setting & Addressing: two-row LCD display & 4 control buttons, stand-alone operation with 3 editable programs (each up to 25 steps)
• Protocols: USITT DMX-512, RDM
• Wireless CRMX™ technology from Lumen Radio (on request)
• DMX Protocol modes: 2
• Control channels: 22, 16
• Pan/Tilt resolution: 8 or 16 bit
• RGBW or CMY: 8 or 16 bit
• Zoom: 8 or 16 bit
• Dimmer: 8 or 16 bit (internal 18 bit)

• Pan movement: 450°
• Tilt movement: 228°
• Movement control: Standard and Speed
• Controllable speed of Pan/Tilt movement
• Automatic Pan/Tilt position correction

• Maximum ambient temperature: 45°C (113°F)
• Maximum surface temperature: 75°C (176°F)
• Minimum operating temperature: -5°C (23°F)

• Power supply: Electronic auto-ranging
• Input voltage range: 100-240 V, 50/60 Hz
• Power consumption: Max. 220 W
• Power in/out connector: Neutrik powerCON in/out
• DMX and RDM data in/out: Locking 5-pin XLR

Matching Slot Effects Optc

The rental price of the Robe Robin LED Beam 150 is €37,50 per piece, per day
For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.

More...

Contact us

Rent-All sales office

• Available from: Sugo-Fest
  (Oct. 28, 2019 - Nov. 06, 2019 PST)

  Two young members of the Worst Generation have formed a pirate alliance to epically boost the offensive powers of the crew!

• Available from: Sugo-Fest
  (Oct. 28, 2019 - Nov. 06, 2019 PST)

  Big Mom, one of the Four Emperors, along with her thundercloud and sun Homies, are here to massively boost the crew's HP and add a new type of attack boost!

• Available from: Sugo-Fest
  (Oct. 28, 2019 - Nov. 06, 2019 PST)

  The No. 1 and No.2 agents of CP9 are here to deal Special damage to all enemies and boost the crew's ATK!

• Available from: Sugo-Fest
  (Oct. 28, 2019 - Nov. 06, 2019 PST)

  The New Kama duo from Impel Down are here to support the crew by removing various status effects!

• Available from: Sugo-Fest
  (Oct. 28, 2019 - Nov. 06, 2019 PST)

  The two leaders of Baroque Works are here to aid the crew with damage reduction and type effect boosts!

• Available from: Sugo-Fest
  (Oct. 28, 2019 - Nov. 06, 2019 PST)

  Vice Admiral and Captain of the Navy's G-5 Branch are here to defeat foes by dealing static damage and changing slots!

• Available from: Kizuna Clash!!
  (Oct. 24, 2019 - Nov. 06, 2019 PST)

  Peerless duo for the Straw Hat Pirates are here to mop up by dealing damage to all enemies and boost the ATK up to 2.75x!

• Available from: Treasure Map
  (Nov. 13, 2019 - Nov. 17, 2019 PST)

  Captain and First Mate of the Red-Hair Pirates are here at Treasure Map!

• Available from: Clash!!
  (Nov. 05, 2019 - Nov. 11, 2019 PST)

  Warden and Under Warden of Impel Down are here at Extra Island!

• Available from: Showdown!
  (Oct. 28, 2019 - Nov. 03, 2019 PST)

  After two years of training, the ex-weakling duo are here at Extra Island!

• Available from: Coliseum
  (Oct. 29, 2019 - Nov. 24, 2019 PST)

  The shadow rulers of Dressrosa are here at Coliseum for some action!

• Available from: Event Quest
  (Oct. 28, 2019 - Nov. 28, 2019 PST)

  The duo in the Mirro-World will make tap-timing easier to land PERFECT with their Switch Effect!

Get great rewards based on your total
number of cleared quests since start of
your Treasure Cruise adventure until Oct. 28, 2019 (18:59) PST!

In order to check your total number of quests cleared,
please enter your ID (User ID) assigned by this app.
*9-digit number

*Please enter the 9-digit number